RELAY
are devices for use in power plants distributing over medium voltage lines.
READING MODEM (AMR)
The Automatic Meter Reading Modem (OSOS-AMR), a main function of AMR devices is to eliminate the need for an official to circulate subscribers to read the meter, instead, to allow the meters to be read remotely.
TEST SYSTEM
The approach normally followed for this is to remove the meter by the authorized person and take it to the test center, where it is tested.
NODE
The main competence of the product; Cost reduction is achieved by sharing components such as CPU, display and communication interface by multiple protection relays.
SCADA
The Low Voltage (LV) Automation system consists of Field Control Device (FCD), Departure Tracking Module, Analyzer, Digital Input / Output modules to monitor the LV side of the substations on the main and LV departure basis.
DEVICE (RTU)
The Field Controller (FCD) is a device that provides communication between the physical field equipment and the SCADA system, transmits the signals and information from the field to the central control system, and carries the commands from the central control system to the field.
COMMUNICATION SYSTEM
The product was designed to provide ease of management to electricity subscribers by remotely performing service interruptions by Pavotek Energy R&D department.
TRACKING DEVICE
Wireless Line Tracking Device Bluetooth (DTC-BT) broadcasts the Energy On/Off information of Low Voltage spreads separately for 3 phases and transmits this information wirelessly via Bluetooth.
TRACKING DEVICE
The Line Tracking Device (DTC) transmits the Energy On/Off information of the Low Voltage outputs to modem via RS-485 Modbus RTU.
MODULE
Pavotek I/O-1606RS Digital Input/Output Module, which can be controlled via the industry standard Modbus RTU protocol, offers users cost-effective remote monitoring and control.